It is advisable to replace the entire bathroom plumbing system every 10 years or if it does not meet current safety standards. If you are about to make a reform in the bathroom or kitchen, it is better to contact a professional Plumber In London to check the entire plumbing network.
Aspects to consider before installing plumbing in a bathroom
There are some key concepts that a professional Plumber In London will take into account when designing the pipe network. If he doesn’t mention them to you, you can check on your own and realize that a good job is being done.
Less is more
This philosophy of life is also applied in the plumbing installation. Since the route of the pipes must be as short and simple as possible. So the toilet may need to be located as close as possible to the drain that leads the waste to the septic tank.
Avoid bad odors
To avoid bad odors in the environment, it is recommended to connect all the pipes from the toilet and the sink to the siphon bottle. In the following link you can find the reference prices for labor and materials.
Inclination of the pipes
For the drainage of sewage to be efficient, the degree of inclination of the bathroom pipes must be taken into account. Since if the slope is not enough, the debris will clog the pipe and if the slope is excessive, the water will flow fast and will not properly drag the debris. The correct incline should be a minimum of 2%. The width of the pipe is also important, since the larger the diameter, the smaller the necessary slope.
It is desirable that the pipes in the bathroom be protected with external corrugated pipes. In this way you will avoid possible humidity.
Install a false ceiling
This can help quickly identify potential water leaks. It also prevents a future breakdown from disturbing the neighbors on the upper floor.
Check out some tips to unclog bathroom and kitchen pipes.
Types of pipe used in plumbing
Choosing the correct piping material is essential for the system to work efficiently. The available materials are plastic, metal or polyethylene.
Among the plastic materials are PEX, CPVC and PVC. They are cheaper and resistant to abrasion and corrosion. However, they do not usually withstand high temperatures, since it can cause deformation.
As a general rule, PVC should be avoided for hot water use. Instead, you should opt for Cross-linked Polyethylene (PEX) pipes or Chlorinated Polyvinyl Chloride (CPVC) pipes. Although it is advisable to stop using it in places where the water has a high concentration of chlorine.
For the transport of hot water, metal pipes are recommended, such as those made of stainless steel, copper or galvanized. The price of stainless steel tubes means that their use is not very frequent. It is only essential in places where saline water is transported.
Galvanized pipes are used in homes because the treatment it has allows the metal to resist oxidation and corrosion against water. Although in recent years they have been replaced by PEX pipes.
Every time some plumbing maintenance needs to be done, it is necessary to touch up the bathroom lining. If you are determined to renovate it, we invite you to read the article on the types of coatings for bathrooms.Sometimes people don’t clearly understand the sign of plumbing problems. Checkout here the signs that tell about the major plumbing issues.