Hardwood floors are an excellent investment in your home and look fantastic. But over time, they start looking dull or lose their lustre. It is due to high foot traffic on your floors or some scratches from pets or heels you wear. Instead of installing the new floors, you can consult professionals for floor sanding Perth and refinish them by bringing back their former beauty.
Do you want to know how the refinishing process goes? Do you know that even direct exposure to the sun can change the colour of your wood? You can do hardwood floor refinishing by yourself if you have the time or budget, but hiring a professional floor sanding Perth team is the best option.
They ensure that the refinishing job is done the first time correctly. If you consider doing the refinishing process yourself, you are well informed about refinishing. Let’s continue to read to know the floor sanding process.
Tools & Equipment You will Need to Refinish the Floor
Here is the list of tools and equipment that you will need while refinishing the hardwood floors these are:
- Drum sander
- A belt sander
- Edge sander
- Orbital / palm sander
- Buffer
- Vacuum
- Tack cloths
- Dust masks
- To protect years
- Goggles
- Knife
- Scrapper
- Natural bristle brush
- Masking tape
- Plastic sheeting
- Pencil
- Wood filler
- Floor stain
- Polyurethane sealer
Steps Included in Refinishing the Hardwood Floor
Here are the steps that are included in the refinishing the hardwood floor:
Preparing the room for sanding
Almost 90% of the result of the refinishing process depends on the preparation, so it is necessary to prepare the room thoroughly before starting the process. Move out all the furniture from the room so the refinishing process can be done efficiently.
The next step is removing the show base molding. It is a quarter-round molding attached where the floor meets the wall. It is necessary to remove it by gently inserting a molding bar between the floor and the trim by protecting your baseboard with a piece of scrap wood. Do not use a large crowbar as it can damage the molding.
Fixing the Squeaks and Creeks
The next step is to check for any squeaks, creeks, nails, or loose boards. Search for the nails carefully that may damage a sanding pad. Gently tap them back in with a hammer if you find any nails. After that, take your wood putty and fill in all holes by sliding the putty knife all around the wood.
Start Sanding
After preparing the room, it is time to start sanding. After the wood putty dries, it is best to do rough sanding through the drum sander. But make sure that you are replacing the abrasive belt after every 250 square feet. Using a 36 – 40 grit sandpaper belt, you can begin and last up to 100 grit sand. You must begin it with coarse sandpaper for the best results.
Sweeping and Vacuuming
Sweeping and sanding between the sands are the most important step of refinishing. This step is especially for removing dust and debris left over the previous sand, which will help get a 100% result.
Sanding all the Edges & Corners
Now begin the further process by sanding all the edges, closet floors, and hard-to-reach corners with the sanding edger. But make sure that you are using the same grade with sanding edger as you do while sanding the hardwood floors.
Screen Sand and Remove Dust
Use a floor buffer fitted with a fine-grit screen pad to level out all minor unevenness. It is used to buff away all the unwanted scratches left behind from the drum sander and edger and ensures a smooth surface. Furthermore, use a damp cloth to wipe out all the dust from the floor before applying a stain and floor finish.
Staining and Finishing the Hardwood Floor
Now start staining your hardwood floor in the direction of the wood grain. Use a scrap to wipe away the access stain. Then the last step is applying the wood finishing. But firstly, leave the stain to dry before applying the finishing. You can apply the finishing according to your wood texture. Apply the finishing with a lambswool applicator. Apply the finishing at least three times to achieve the best results.
Hire Professional Floor Sanding Perth Team
Hiring a professional hardwood floor refinishing team is the best option. They have vast experience and skills in refinishing the hardwood floor and use advanced equipment and machinery for the sanding process. The professional floor sanding Perth team will efficiently bring your floors’ original beauty and shine. They also provide floor polishing Perth services at an affordable cost.
Conclusion
Here you read the steps of floor refinishing so your hardwood floors remain beautiful and glamorous for years. If you are interested in refinishing the hardwood floors but can’t manage the whole process, hiring a professional floor sanding team is the best option. HH floor sanding team in Perth also provide high-quality floor sanding and polishing services.